Promising directions of research and development the technology of synthesis of acrylurethane film-forming materials for UV curing

Current trends in the development and application of UV-curable acrylic urethane film-forming materials are summarized. Examples of the most promising technologies for producing coatings using radiation polymerization are given. Technical solutions and technologies for using new photoinitiators and monomers to improve the protective and physical-mechanical characteristics of UV-curable acrylic urethane film-forming coatings are presented.

1. Бабкин О.Э. Полимерные покрытия УФ-отверждения: Учебное пособие. СПб.: изд-во СПбГУКиТ, 2012. 47 с.

2. Barbeau P., Gerard J.F., Magny B., Pascault J.P. Effect of the diisocyanate on the structure and properties of polyurethane acrylate prepolymers // J. Polym. Sci. Part B: Polym. Phys. 2000. Vol. 38, No. 21. Р. 2750–2768.

3. Srivastava A., Agarwal D., Mistry S. UV curable polyurethane acrylate coatings for metal surfaces // Pigment. Resin Tech. 2008. Vol. 37, No. 4. Р. 217–223.

4. Ando M., Uryu T. Synthesis of polymer materials by low energy electron beam. I. Polyurethaneacrylate materials prepared by the EB and the UV solidstate polymerisation // J. Appl. Polym. Sci. 1987. Vol. 33, No. 5. Р. 793–807.

5. Decker C. UV radiation curing chemistry // Pigment. Resin Tech. 2001. Vol. 30, No. 5. Р. 278–286.

6. Kim B.K., Lee K.H., Kim H.D. Preparation and properties of UVcurable polyurethane acrylates // J. Appl. Polym. Sci. 1996. Vol. 60, No. 6. Р. 799–805.

7. Nabeth B., Gerard J.F., Pascault J.P. Dynamic mechanical properties of UV-curable polyurethane acrylate with various reactive diluents // J. Appl. Polym. Sci. 1996. Vol. 60, No. 12. Р. 2113–2123.

8. Xu G., Shi W. Synthesis and characterization of hyper branched polyurethane acrylate used as a UV curable oligomers for coatings // Prog. Org. Coat. 2005. Vol. 52, No. 2. Р. 110–117.

9. Azam A.M., Mubarak A.K., Idriss A.K.M. Study of radiation-cured thin films of aliphatic and aromatic urethane acrylate prepolymers // Adv..Polymer Technology. 1998. Vol. 17, No. 3. Р. 259–267.

10. Decker C. Kinetic study and new applications of UV radiation curing // Macromolecular Rapid Communications. 2002. Vol. 23, No. 18. Р. 1067–1093.

11. Ruiz C.S.B., Machado L.D.B., Pino E.S., Sampa M.H.O. Characterization of clear coating cured by UV/EB radiation // Radiation Phys. Chem. 2002. Vol. 63, Nos 3–6. Р. 481–483.

12. Kim B.K., Lee K.H., Kim H.D. Preparation and properties of UVcurable polyurethane acrylates // J. Appl. Polym. Sci. 1996. Vol. 60, No. 6. Р. 799–805.

13. Hossain M.A., Hasan T., Khan M.A., Idriss A.K.M. Characterization of UV-cured film of urethane acrylate // Polymer-Plastics Tech. Eng. 1994. Vol. 33, No. 1. Р. 1–11.

14. Idriss A.K.M., Sasaki T. Effect of diluents on the thermal and mechanical properties of electron beam cured films of urethane acrylates // Radiation Phys. Chem. 1994. Vol. 43, No. 4. Р. 371–375.

15. Kardar P., Ebrahimi M., Bastani S., Jalili M. Using mixture experimental design to study the effect of multifunctional acrylate monomers on UV cured epoxy acrylate resins // Prog. Org. Coat. 2009. Vol. 64, No. 1. Р. 74–80.

16. Kim H.K., Kim J.G., Hong J.W. Determination of key variables affecting surface properties of UV curable coatings using experimental design. Polym. Testing. 2002. Vol. 21, No. 4. Р. 417–424.