Buy (1000 RUB)
Generate QR code
Open Access
Subscription or Fee Access
Improving the quality of construction products made of polyvinyl acetate dispersion with liquid glass
Abstract
This article reports on investigation of sodium silicate positive impact on the polyvinyl acetate dispersion. It is established by the authors that water-resistance of the obtained from polyvinyl acetate dispersion polymer body increases. The contact adhesiveness and thixotropy of the glues increase too.
About the Authors
V. A. Voitovich
Nizhny Novgorod State University of Architecture and Civil Engineering
Russian Federation
Russian Federation
Candidate of Tech. Sci., Associate Professor
Nizhny Novgorod, 603950, Ilyinskaya str., 65
I. N. Khryapchenkova
Nizhny Novgorod State University of Architecture and Civil Engineering
Russian Federation
Russian Federation
Candidate of Tech. Sci., Professor
Nizhny Novgorod, 603950, Ilyinskaya str., 65
References
1. Войтович В.А., Хряпченкова И.Н. Повышение водостойкости изделий, изготовленных из поливинилацетатной дисперсии // Лакокрасочные материалы и их применение. 2023. № 7–8. С. 24–29.
2. Войтович В.А. Материал тысячи возможностей. Волго- Вятское кн. изд-во. 1982. 78 с.
3. Сухарева Л.А. Долговечность полимерных покрытий. М., Химия. 1984. 240 с.
4. Зубов П.И., Сухарева Л.А. Структура и свойства полимерных покрытий. М. Химия. 1982. 256 с.
5. Юхимчук О.А., Толмачев И.А. Модификация реологических свойств латексных пленкообразователей в присутствии полисиликата натрия // Лакокрасочные материалы и их применение. 2000. № 2–3. С. 28–31.
Review
For citations:
Voitovich V.A., Khryapchenkova I.N. Improving the quality of construction products made of polyvinyl acetate dispersion with liquid glass. Russian Coatings Journal. 2025;(12):26-28. (In Russ.)
Views:
46
JATS XML
Email this article 